Esso Hydraulic Oil Series | HTF | Grease | Hydraulic oil air compressor oil Esso | HTF | Grease | Hydraulic oil air compressor oil Esso | HTF | Grease | air compressor oil 
 Esso sought (Esso NUTO) is a series of high quality mineral oil-based cycle, including resistance to corrosion and oxidation inhibitors and anti-foam additives. Esso sought (Esso NUTO) oil for hydraulic and lubricating oil circulation system and other requirements of long life, but does not require anti-wear extreme pressure or industrial applications. Esso sought (Esso NUTO) oil ISO 32 至 100 is divided into four viscosity grades. 
 Esso sought (Esso NUTO) anti-oil emulsion, and can be quickly in the water separation tank, not together with the oil cycle. Esso sought (Esso NUTO) oil is recommended for high-quality oil to the recycling or reuse for long-term industrial applications. 
 ESSOTHERM 500 (Esso HTF 500) 
 Cable HTF (ESSOTHERM) 500 is a high quality heat transfer oil, is recommended for bulk oil temperature does not exceed 315oC in a closed system. For open systems, the proposed maximum bulk oil temperature 180oC. Because of its low volatility, low temperature performance, low corrosion, relatively low viscosity and good heat transfer characteristics, Esso HTF (ESSOTHERM) 500 is suitable for most common applications. 
 Esso HTF (ESSOTHERM) 500 is a wide range of heat transfer applications. As long as no more than the use of temperature extremes, Esso HTF (ESSOTHERM) 500 of the thermal stability and long service life, will not deposit formation or viscosity increase. 
 Exxcolub R Series (Esso Aishi high R series) 
 Esso Aishi high R (Exxcolub R) series of high-quality vinyl compressor lubricant, is divided into ISO 220,320 and 460 viscosity grades. Aishi high-R 220 and R 320 is a polymer thickener in food grade white oil-based lubricants for high pressure ethylene compressor lubrication. The polyethylene production process, to use high-speed reciprocating compressors will compress ethylene gas to 500 Mpa (5000 bar) pressure. These applications, the polymerization process, the compressor lubricating oil may be polyethylene contact. In this case, the purity of oil must meet the requirements, and will not change the nature of polyethylene. Esso Aishi R 220 and R 320 high-grade lubricants for the compressor cylinders can provide good lubrication, but also compatible with the polyethylene process. May be used in the production of polyethylene in contact with food products, such as polyethylene for food packaging. Esso Aishi R 220 and R 320 with high thermal and chemical stability are good. 
 ESSO UNIREX E